News

Situation: Overlooking Lake Wanaka and the Remarkables the project had a steep house site, but there was a clear vision of what it was to become. The Dacha as it would be named means 'home away from home', which for the owners has a very special meaning. Dreaming of building not just a hotel or lodge but a space to be enjoyed and shared by people from throughout the world, they wanted their home to be unforgettable.With the scenery of this incredible location being paramount to the design of the home, the brief was to not let the house get in the way of the view. This required it to complement the surroundings, while also ensuring it met the strict resource consent conditions of the region. Challenge: Needing to be compliant yet durable enough to withstand the cold conditions in Wanaka required the products for the project had to be chosen very carefully. To accentuate the lines of the house and ensure it wasn't intrusive to the environment, the architect decided to specify a low-pitched roof. The aim of this roof was to blend rather than draw attention to the home, as the exterior had to have dark recessive tones to meet council criteria.

Most roofs are built-to-falls for drainage purposes. Where the level between the door threshold and the drainage outlet is significant, where the roof falls in more than one direction, where large drops or channels are present, or where there are multiple and complicated changes in the fall and levels across the roof – then the TA-R range of Adjustable Support Pedestals are the perfect tools. Taurus TA-R series adjustable support pads are designed with a screw jack which is wound up and down to achieve a completely flat upper paving surface. Changes to height can be made whilst the slab is in place. This saves a great deal of time and labour. The rainwater runs between and under the slabs, so there is no standing water left on the surface. This improves health & safety as it makes the paved area less slippery. More roof and balcony designs incorporate a completely flat upper surface in order to utilise them more effectively as leisure areas. More attractive paving with spirit-level-flat finishes can be achieved using a much larger variety of different stone and slab shapes using our pedestal supports. Hardwearing, attractive areas can be created on what may have been left as exposed waterproofing membranes. Not only does this help protect potentially vulnerable areas and improve aesthetics, but it increases the yield of the building footprint significantly. These robust support pads can withstand concentrated loads of 3000kg each, and the 200mm diameter base plate allows the weight to be evenly spread to avoid point loading onto the deck beneath. As this is a suspended system there are no mechanical fixings involved. The slabs can simply be lifted up should the roof deck need to be inspected in the future for damage or leaks. Taurus support pedestals are available from 20mm to 1360mm high

Three Great Pedestal Systems for all your paving and decking needs. Fixed Paving and Decking Support Pedestals Adjustable Paving Support Pedestals Adjustable Decking Support Pedestals 1. Fixed Paving and Decking Support Pedestals. A fixed base pedestal system where low profile paving and decking is needed, supplied in 5 different sizes from 13mm to 30mm. Our fixed paving and decking support pedestals can easily be divided into several pieces for flexibility. 2. Adjustable Paving Support Pedestals. A flexible adjustable paving pedestal system designed for heights between 20mm to 1360mm. The adjustable system has different joint shapes and sizes that lock into the HEAD unit allowing a wide range of shapes, angles and sizes to suit your paving needs. There is also a movable slope corrector.It fits on the HEAD unit for steeper slopes. 3. Adjustable Decking Support Pedestals. A flexible adjustable decking pedestal system designed for heights between 20mm to 1360mm. The adjustable system has four different joint shapes and sizes that lock into the HEAD unit for all your joisting and decking needs. There is also a movable slope corrector.It fits on the HEAD unit for steeper slopes. Pedestal Advantages: 1.Environmental protection. 2.Easy and quickly installation, maintenance convenience. 3.Easy embed pipe. 4.Easily removed and re-used. 5.Light weight and high load-bearing capacity.(Can bear 3 tons) 6.Physical properties are stable.(PP material) 7.Reduce the loading of the building. 8.Can be slope correction.(0-5%) 9.Anti-correct,anti-aging,long service life and recyclable.(20 years) 10.Height range: 20-1360mm 11.Accelerate completion of the project. 12.Excellent drainage performance.

The support is composed of an adjustable base and a rotatable joint, in the middle of which is an elevated piece, which can increase the height and rotate the thread to adjust the desired altitude. Its main accessories are separators, gaskets and keel bracket. Before installation: 1, Product ground installation requirements: Before the construction requirements of the ground relative leveling do not appear local high-low fluctuation phenomenon, cement ground matte smooth. 2, each component threaded requirements: Rotation around the components can be adjusted to the required height, pay attention to not spinning too tightly or spin out the indicator range. 3, adjust the gradient: the first to find the slope to adjust to 4% and then find the slope of 4% arrow to adjust to the direction of the slope, and then the overall pavement in accordance with the previous adjustment to find the slope in turn. When installation: 1, according to the requirements of the design and construction of the height adjustment, the installation of Stone gap width is a "separate piece" control adjustment, fine-tuned stone high and low gasket adjustment. 2, the application of the separation of skills: mainly for the stone left seam, in order to drain water and storage. In the case of different construction conditions can be split. According to the design requirements, the use of different pieces of the separator size, at the same time separator is detachable, encountered different construction conditions can be split. 3, the application of the gasket: the installation of stone because of the thickness of the stone processing accuracy is uneven, there may be a high fluctuation phenomenon. At this point can adjust the height of the support, if not, can be fine-tuned through the gasket. Gaskets can be split, used for local adjustment of the height of stone.

adjust the height according to the requirements of design and construction. The gap width of stone is controlled and adjusted by "dividing piece", which can maintain the circulation of water surface system and fine adjust the height of stone. It can be realized by gasket.The stone material only needs to be placed along the edge according to the segmentation area of the segment.

First. water and fountain is one of the indispensable landscape engineering, do fountains and water engineering, because of the complex pipeline, the traditional construction technology are poured in concrete pipe, some even exposed to the outside, so bring a lot of problems for later engineering maintenance, the aesthetic effect is also very poor. Adjustable pedestal will be able to solve the above problems? Second. outdoor wood flooring generally use the traditional construction technology of laying, due to long time in contact with the ground wind and rain, wood perishable, even if not rot will aliasing distortion due to moisture, and the traditional craft wooden floor height is limited, otherwise there will be security risks. The traditional technology not only can not meet the requirements of modern construction engineering, but also greatly reduces the aesthetic level, which reduces the practical life of the wooden floor more seriously. Third. and the transformation of old buildings, the bearing capacity of building the object itself is limited, if the construction process using the traditional extensive use of reinforced concrete construction, there are serious harm to the building itself, but it is not easy to difficult construction, is not conducive to the maintenance of the products can not only reduce the weight. Convenient installation, greatly shorten the construction period, it will not affect the normal work of the customer, adjustable pedestal will be able to solve the above problems; Jiangxi Taurus technology Co., Ltd. is a overall solution provider of multipurpose support overhead system. We are committed to providing professional multipurpose support overhead products, solution consulations and technical support services for garden landscape.mirror waterscape. roof garden,.square, fountain,.interior decoration. balcony decoration. prefabricated house and other projects. With high quality, simple design and outstanding service, Our pedestals have been exported to many countries worldwide, especially have built good cooperation with Australia. America. Unit Kingdom.German.Canada company etc.

Many people know that in the process of construction, sometimes if the engineering environment is not very good, it will lead to the delay of the whole project, and sometimes it will lead to a longer period of time, which will make people work longer hours.Sometimes the construction team will make more demands according to the situation at that time, which will lead to more project costs, and the construction time can be shortened more effectively if universal bracing is used.The important thing is that, with his presence, construction will become easier. Many people know that when laying some roads, sometimes boards will be used for laying, and sometimes marble slabs will be used for laying. Adjustable support pedestal than others in the process of the construction of production application is more extensive, because it can have higher stability, in the process of construction, but also can achieve better effect, because people all know, there are some in the process of construction, if the plate is not particularly laid on solid, to cause a decline in the quality of the whole project, in this case, to project completion acceptance when it is likely to be unqualified, and if the situation is serious, the scrap will lead to the whole project.

According to adjustable plastic pedestal specific application.It can be roughly divided into: Stone support;Waterscape stone support device;Wood support;Booth holder. 1.Stone support device -- used for laying marble and garden stone. After using the stone support device, the marble and garden stone are in the overhead state, which can be conveniently and quickly embedded pipeline and later maintenance.After using the stone support device, the stone surface drainage performance is superior, the stone surface has no obvious water accumulation, and the overall landscape effect is outstanding. 2.Waterscape stone support -- used for the laying of landscape waterscape stone according to the landscape designer's design concept and requirements, combined with the size and shape of the stone support.The properties of high density polypropylene material determine that the support has excellent water resistance, aging resistance and service life.In the landscape fountain, shallow pools, dry spray, water curtain wall can be widely used.Waterscape support is conducive to the laying of water pipes, lights and other pipelines in waterscape, as well as the installation and maintenance of building pipelines. 3.Wood support -- used for the laying of wood flooring, landscape anticorrosive wood, suitable for the laying of wood flooring of various shapes and sizes and landscape anticorrosive wood.Because the construction of wood support is convenient and quick, the installation cost is low, the maintenance is convenient, at the same time the floor and the anti-corrosion wood below easy to lay all kinds of construction pipeline, pipeline maintenance is convenient and thus get many landscape designers recommended use 4.Booth holder - the booth holder is suitable for all kinds of exhibition booths.Because of the convenient construction and low installation cost, the temporary booth and permanent booth can be built at the same time.It is fast and easy to disassemble the booth by using the booth holder, so it is widely used in the construction of indoor and outdoor booth.Because the temporary pipeline under the booth is easy to construct when using the booth supporter, laying the pipeline is convenient and quick, which can solve many practical problems on site.